|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Project: USS Enterprise - Nuclear Powered Aircraft Carrier
Home Base: U S Naval Shipyard, Norfolk, Virginia USA
Surface Preparation:
Near White Metal Blast, per SSPC-SP-10; NACE 2
Coating:
SOMAY "HYCOTE" 151 – 100% Solids, Polyamine Epoxy Coating SOMAY "HYCOTE" 151 is the ONLY NAVSEA APPROVED Product for Underwater
Paint Application to U.S. NAVY Vessels, per the U.S. Navy Office of the Director of
Ocean Engineering
Total: 18 mils (450 microns or micrometers) dry film thickness |
|
|
|
 |
|
|
|
 |
|
|
|
Project: Texaco, Inc., Off-Shore Oil Rig Platform, Gulf of Mexico
Surface Preparation:
Near White Metal Blast, per SSPC-SP-10, NACE 2
Coating:
SOMAY "HYCOTE" 151 – 100% Solids, Polyamine Epoxy Coating
Color: Black
Total: 18 mils (450 microns or micrometers) dry film thickness for 1 coat |
|
|
|
|
|
|
|
 |
|
 |
|
|
|
Project: Sattler Pier Piles, Subic Bay, The Philippines
Paint to Protect Pilings Below the Waterline, through the Splash Zone and Above
the Waterline
NOTE: These pictures show pilings in the warm saltwater of the Philippines, still being
protected by "HYCOTE" after 15 years of immersion.
Surface Preparation: Sandblast to 3 Mil minimum profile. Prime Coat: "HYCOTE" 151 Polyamine Epoxy Coating
Finish Coat: "HYCOTE" 151 Polyamine Epoxy Coating
Total: 20 mils dry film thickness for 2 coats Case History No. S/C-164-2005 |
|
|
|
|
|
|
|
 |
|
|
|
Project:
United States Coast Guard Base, Integrated Support Command (ISC), Portsmouth, Virginia USA Prepare steel surface and apply coating of SOMAY/UNDERWATER TECHNOLOGIES® "HYCOTE"
151 Polyamine Epoxy Coating to seawall steel sheet bulkhead pilings at U S Coast Guard Base; Coat from under wooden fender on top edge of docks to underwater base of bulkhead at bottom of ship dock.
Surface Preparation and Application by Seaward Marine Corporation, Norfolk, Virginia USA in the Summer of 2005. All pictures courtesy of
Seaward Marine Corporation. Please see close-up pictures below.
Surface Preparation:
Sandblast above the waterline, through the splash zone and below the waterline to SSPC-SP-10; NACE 2, Near White Metal Blast to a 3 mil profile on the steel surface
One Coat:
SOMAY/UNDERWATER TECHNOLOGIES® "HYCOTE" 151 Polyamine Epoxy Coating. Apply within 30 minutes of sandblasting. Application by hand below the waterline; application by spray above the
waterline. Total: 20 mils film thickness applied at spreading rate of approx. 60 sq.ft./gal. (= 1.51 sq.m./L)
Color:
|
|
|
|
 |
|
|
|
SOMAY "HYCOTE" 151 Applied to Steel Bulkhead on the Right - After 2 years
Nothing Applied to Steel Bulkheads on Left Side of Picture. |
|
|
|
 |
|
|
|
Closer Picture of "HYCOTE" 151 Painted Steel Bulkhead on Right - After 2 years
Nothing Applied to Steel Bulkhead on Left Side of Picture. |
|
|
 |
|
|
|
Close-Up of SOMAY "HYCOTE" 151 Application to Steel Bulkhead |
|
|
 |
|
|
|
Close-Up of SOMAY "HYCOTE" 151 Application to Steel Bulkhead Case History S/C-176-2007 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"The SOMAY® PAINT FACTORY"sm
"Where Everyone Buys at Wholesale Every Day!"sm
Products to Protect and Preserve Your Property
Since 1926
Somay Products, Inc.
4301 N.W. 35th AVENUE
(Driveway Entrance @ 3501 NW 41st Street)
MIAMI, FLORIDA 33142-4382, U.S.A.
OPEN: M-F 8-4 - Sat. 8-12
Technical Service: (305) 633-6333
Customer Orders: (888) 2-4-SOMAY
Fax: (305) 638-5524
E-Mail:paint@somay.com |
|
|
