FLOOR COATINGS

 

 

FLOOR COATINGS FOR GENERAL PURPOSE USE

770 - SOMAY HEAVY DUTY POLYURETHANE MARINE VARNISH - Premium quality, heavy duty, industrial grade, single component, solvent borne (mineral spirits), polyurethane-based, exterior high gloss marine varnish with Ultraviolet Light Absorber, especially formulated to give an exceptionally hard finish that helps to protect, preserve and retain the natural beauty and color of wood.  Resistant to severe weather, fresh and salt water, boiling water, dilute acids, alcohol and normal marring or scuffing.  Over 41% Vol. Solids = 671 sq.ft./gal./mil DFT.
Product Data Sheet - [MSDS]

 

237 - POLYURETHANE HIGH GLOSS ENAMEL - An exceptionally high quality, premium grade, heavy duty, tough, long wearing, weather and rust resistant, polyurethane/alkyd (oil) high gloss enamel formulated especially for severe tropical climates.  This solvent-borne enamel will spray, brush or roll easily.  It contains no hazardous heavy metals, thus being ideal for children's toys or furniture.  Use on properly prepared and primed iron, steel, aluminum, wood, concrete, masonry, plaster and many other surfaces including floors, steps, walkways, etc.  Available in White, Stock Colors and hundreds of Custom Colors.  Over 50% Vol. Solids = 815 sq.ft./gal./mil DFT. 
Product Data Sheet - [MSDS]

 

230 - "PREMIUM" 100% ACRYLIC LATEX SATIN FINISH FLOOR ENAMEL - A premium quality, 100% acrylic latex enamel for use on exterior or interior hard surfaces such as patios, steps, walkways, floors or playing courts.  It dries quickly to a tough, durable, satin sheen enamel finish that is easily maintained. Contains a very fine texture to provide skid resistance.  Available in White and several popular floor and patio colors.  Our tropical climate formula contains the maximum amount of mildewcides.  Made with the hardest acrylic resins available from modern chemical technology.  Over 30% Vol. Solids = 492 sq.ft./gal./mil DFT. 
Stock Colors Available
Product Data Sheet - [MSDS]

 

942 - SPORTS COURT NON-SKID COATING - This premium quality, 100% acrylic latex Sports Court Coating has been formulated to help create a skid-resistant surface on tennis, paddle, hand ball, basketball and volleyball courts.  Contains a coarse texture additive to give a skid-resistant surface also on walkways, steps, porches, breezeways, patios and around swimming pools.  It dries quickly, providing a tough, durable, attractive finish.  Available in White (for lines) and traditional Tennis Court Red and Green.  Over 50% Vol. Solids = 804 sq.ft./gal./mil DFT. 
Stock Colors Available  
  
 Product Data Sheet - [MSDS]

 

777 - SOMAY "PREMIUM" "PST" - PRIMER-SEALER-TOPCOAT - A Premium Quality, 100% poly-acrylic, waterborne, universal, all-purpose, exterior and interior, clear, non-yellowing coating that can be used as a Primer, a Sealer, a Waterproofing Coating and a Topcoat or Finish Coating.  It has excellent resistance to ultraviolet (sun) light degradation, excellent adhesion to practically every properly cleaned and prepared surface, and dries to a hard finish that has excellent resistance to wear due to normal pedestrian traffic.  No solvents, no fumes & exceptionally user and environmentally friendly.  "PST" will NOT "blush" or turn "white" if moisture develops under the coating, but will remain clear.  Because SOMAY "PST" will always "breathe", it allows moisture vapor to escape through the cured coating film.  "PST" can be applied to concrete, masonry, non-glazed porous brick, stone, coral rocks and other porous materials, wood decks, docks or porch floor surfaces, and primed ferrous metal. Over 20% Vol. Solids = 182 sq.ft./gal./mil DFT. 
Product Data Sheet - [MSDS]

 

775 - SOMAY CONCRETE & POROUS SURFACE CLEAR SEALER - Seal and protect both interior and exterior concrete surfaces.  This high quality acrylic silicone sealer is used to seal all properly cured and prepared porous concrete and similar masonry, brick, coral, slate and stone surfaces.  It penetrates, seals, dries rapidly and is unusually durable.  No. 775 is exceptionally resistant to: weathering, fading, dusting, mild acids & alkalis, detergents, gasoline, motor oils, alcohol, water and normal wear.  Solvent borne (xylene).  Expect approx. 100 sq.ft./gal. for the first coat on a porous, but smooth surface.  Coverage may be more for 2nd coat. 
Product Data Sheet - [MSDS]


Scroll to Top

Please see the following chart for additional information:


For General Purpose Use - Single Component Products - Ready to Use

Product Code & Name

Clear/ Color

% Vol. Solids

Sq.Ft./Gal @ 1 mil DFT

Recom-mended Coverage
Sq.Ft/Gal/ Coat
No. of Coats

SOMAY "Cash & Carry" Price/Gal.

Approx. Coating Cost per sq.ft. per mil DFT

Times:
Pot Life Recoat or Lt. Traffic Full Cure

Product Benefits
&
Product Limitations

Somay # 770 Polyurethane High Gloss Varnish with
UV Light
Absorber

Clear

41.23%
671 sq.ft.

330 sq.ft.
@ 2 mils
2 coats = 4 mils

$39.99/gal.

6¢/mil

N/A
16 Hours
24 Hours

Ideal for wood surfaces. NOT intended for heavy traffic. Requires dry surface. High Gloss. Slippery. Slow Drying.

 

Somay #237 Polyurethane High Gloss Enamel

Gray

50.84%
815 sq.ft.

408 sq.ft.
@ 2 mils
2 coats = 4 mils

$30.99/gal. (in 5's)
White

4¢/mil

N/A
8 Hours
24 Hours

Can stand modest traffic. High Gloss.
Not chemical resistant. Requires dry surface. Slippery. Slow Drying.

Somay #230
100% Acrylic Latex Floor Enamel

5 Stock
Colors

30.68%
492 sq.ft.

246 sq.ft.
@ 2 mils
2 coats = 4 mils

$22.99/gal. (in 5's)
White *

5¢/mil

N/A
8 Hours
24 Hours

Low sheen. Contains non-skid. Can be applied over damp surfaces. Low odor. Water cleanup. VOC compliant.

Somay #942 Non-Skid Sports Court Coating 100% Acrylic Latex

Green, Red & White

50%
804 sq.ft.

100 sq.ft.
@ 8 mils
1 coat

$26.99/gal
(in 5's)
White *

3¢/mil

N/A
8 Hours
3 Days

Skid resistant for walkways and sports courts, pool and sun decks, patios, etc.
UV resistant. Low VOC's. Bridges surface cracks. Water cleanup.

Somay # 777
100% Acrylic
"PST"

Clear

20.44%
328 sq.ft.

164 sq.ft.
@ 2 mils
2 coats = 4 mils

$15.99/gal. (in 5's)

5¢/mil

N/A
8 hours

OK for light pedestrian traffic. Low odor.
Water Cleanup.
VOC compliant.
Can be slippery.

Somay #775 Concrete Sealer

Clear

23.7%
380 sq.ft.

100 sq.ft.

$29.99/gal. (in 5's)

8¢/mil

8 hours
24 hours

Thin viscosity to penetrate the open pores of concrete floors. Can be slippery. Gloss increases with each coat

Scroll to Top

 

FLOOR COATINGS FOR HEAVY-DUTY FORKLIFT TRAFFIC ON WAREHOUSE, FACTORY, GARAGE, HANGAR FLOORS, etc.

"CARBOGUARD"® 890 is Carboline's most versatile and most widely used 2-component, high-solids, high-build, high-gloss, cross-linked epoxy mastic. It can be used as a self-priming, single coat corrosion protector on steel, providing high performance, excellent chemical resistance, abrasion resistance, unusual flexibility, tolerance of damp substrates, and easy application by brush, roller or spray over hand-tool cleaned surfaces. "CARBOGUARD" 890 is used for interior floors, walls, piping, equipment and structural steel, and for exterior coatings on rail cars and industrial environments subject to corrosive atmosphere, including chemical plants, offshore oil and gas, pharmaceutical, food, water and wastewater treatment plants, utilities, etc. Use 2 coats for immersion in water and wastewater service. FDA approval for incidental food contact areas. VOC Compliant.  
Product Data Sheet - Part A [MSDS] - Part B [MSDS]

Please see the following chart for additional information.


For Heavy-Duty Forklift Traffic on Warehouse, Factory, Garage, Hangar Floors, etc.

Product Code
& Name

Clear/ Color

% Vol. Solids

Sq.Ft./Gal. @ 1 mil DFT

Recommended Coverage

Sq.Ft/Gal/Coat

No. of Coats

SOMAY "Cash & Carry" Price/Gal.

Approx. Coating Cost
per sq.ft.
per mil DFT

Times:
Pot Life
Recoat or
Lt. Traffic
Full Cure

Product Benefits
&
Product Limitations

Carboline 890 Epoxy

High Gloss

2-component (1:1)

White,

Wide Color Range

75%
1,205 sq.ft.

241 sq.ft.

@ 5 mils

2 coats

= 10 mils

$73.99/gal.

(in 10-g. Kit)

(White)

7¢/mil

3 Hours

8 Hours

1 Day

Chemical resistant. Can take random pattern forklift traffic. Colors more expensive; available by special order. Chalks in sunlight. Solvent odor.

Scroll to Top

 

AVAILABLE PRODUCTS FOR HEAVY-DUTY VEHICULAR TRAFFIC (INCL. TRUCKS, AIRPLANES OR FORKLIFTS) ON WAREHOUSE, FACTORY, GARAGE, HANGAR FLOORS, ETC. AND FOR CHEMICAL RESISTANCE (FOR BOTH FLOORS AND SECONDARY CONTAINMENT)

SOMAY "HYCOTE" 151 - POLYAMINE EPOXY - Two-component, 100% volume solids, can be applied to new, fresh, "green", un-cured concrete, eliminating the normal 28 day curing period for freshly poured concrete floors.  This provides a major time-saver on floor construction projects, because "HYCOTE" 151 will cure in moist conditions, including under water.  Has exceptional abrasion and impact resistance, so can withstand heavy vehicular traffic and even 13,000 P.S.I. water blast, so it is easy to keep clean.  Has exceptional adhesion to properly prepared surfaces, including surfaces under water.  Used as the floor protective coating in extremely corrosive plant environments, such as sugar mills, citrus, food and beverage manufacturing/ processing plants, etc.  100% Vol. Solids = 1,604 sq.ft./gal./mil DFT.
Product Data Sheet

"PHENOLINE"® 187 System consists of a Prime Coat and Finish Coat.  It is a 2-component modified epoxy phenolic, amine adduct cured, high-build, tank lining and/or secondary containment area lining and floor coating for concrete and steel surfaces.  Provides excellent splash and spillage resistance to many harsh chemicals, including acids, alkalis, solvents, jet fuels, petroleum, salt water, municipal and industrial waste water, etc.  Also has excellent abrasion resistance and flexibility, which make it an exceptionally versatile, all around, multi-purpose protective coating with VOC and AIM regulations compliance.
Product Data Sheet-Primer   - Primer Part A [MSDS] - Part B [MSDS]

Product Data Sheet-Finish  - Finish Part A [MSDS] Part B [MSDS]  Part- Part B [MSDS]          Part B [MSDS] 

Please see the following chart for additional information:


For Heavy-Duty Vehicular Traffic and For Chemical Resistance

Product Code

& Name

Clear/ Color

Vol. Solids

Sq.Ft./Gal @ 1 mil DFT

Recommended Coverage

Sq.Ft/Gal/Coat

No. of Coats

SOMAY "Cash & Carry" Price/Gal.

Approx. Coating Cost

per sq.ft.

per mil DFT

Times:

Pot Life

Recoat or Lt. Traffic

Full Cure

Product Benefits

&

Product Limitations

SOMAY

"HYCOTE" 151

High Gloss Epoxy

2-component (3:1)

Dark Gray

100%

1,604 sq.ft.

160 sq.ft.

@ 10 mils

1 coat

$209.99/gal.

(in 1-gal. Kit)

13¢/mil

15 Min.

4 Hours

36 Hours

Apply to wet or "green" cement. No VOC's. Rapid cure. Can apply underwater or to very damp surfaces. Heavy duty use. Non-toxic after mixing. Color may shift. Chalks in sunlight.

Add aggregate for non-skid.

Carboline System

"Phenoline" 187

Primer

2-component (4:1)

Primer

Red

65%

1,043 sq.ft.

209 sq.ft.

@ 5 mils

$103.99/gal.

(in 5-gal. Kit)

10¢/mil

4 hours

24 hours

15 days

Modified Epoxy Phenolic Coating System has exceptional resistance to chemicals, incl. acids, alkalis, salt water, solvents, jet fuel, municipal & industrial waste water, petroleum, etc; DOD & FDA approvals; VOC compliant. Chalks in sunlight.

Add aggregate for non-skid.

Finish

2-component (4:1)

Finish

Gray

(Only)

63%

1,011 sq.ft.

202 sq.ft.

@ 5 mils

$103.99/gal.

(in 5-gal. Kit)

10¢/mil

 

Scroll to Top

 

CONCRETE & ASPHALT DRIVEWAYS, GARAGE FLOORS, POOL DECKS

TUF-TOP WC Floor & Driveway Coating is a durable, water-reducible enamel for use on concrete and asphalt driveways, garage floors, walkways, patios, pool decks, etc. TUF-TOP combines the durability of oil-based paints with the ease and safety of water-based paints. Old, stained, dirty surfaces are easily transformed into very attractive areas with TUF-TOP. It is Florida formulated to be resistant to ultraviolet rays, pool chemicals, oil and grease, driving rains and hydrostatic pressure. HOT TIRES WILL NOT LIFT.

Please see the following chart for additional information:
 

For Driveways, Garage Floors and Pool Decks

Product Code &

Name

Clear/ Color

% Vol. Solids

Sq.Ft./Gal. @ 1 mil DFT

Recommended Coverage

Sq.Ft/Gal/Coat

No. of Coats

SOMAY "Cash & Carry" Price/Gal.

Approx. Coating Cost

per sq.ft.

per mil DFT

Times:

Pot Life

Recoat or
Lt. Traffic

Full Cure

Product Benefits
&
Product Limitations

"TUF-TOP"

Oil Emulsion Driveway Enamel

9 Std. Colors
Black & White

22%

353 sq.ft.

175 sq.ft.

@ 2 mils

2 coats = 4 mils

$32.99/gal. (in 5s)

9¢/mil

4 Hours

12 Hrs-Walk

48 Hrs-Driving

Water Clean-up. Low Odor. Resistant to oils, grease, and pool chemicals. Resistant to hot tire lifting or "patching".

Can be slippery.

Add aggregate for non-skid.

Scroll to Top


 

NON-SKID ADDITIVES
 

 SOMAY stocks various skid-resistant aggregate additives for floor paints and/or floor coatings. Please see the following chart for additional information.

 

Product Code

Clear/ Color

Recommended Addition per Gallon of Coating

"Cash & Carry" Price/Unit

Approx. Coating Cost
per sq.ft.

Product Benefits
&
Product Limitations

SP01056

Aluminum Oxide

"Black"

1 lb./gal.

$2.99/lb.

3¢/sq.ft.

Can wear and pop out of the paint film. Use only in pigmented paint.

Add at time of use.

SP0NSAW

Walnut Shells

"Beige"

1 unit./gal.

(approx. 12-oz unit)

$2.99/unit

3¢/sq.ft.

Better "lock" into the paint film. Use only in pigmented paint. Can ONLY add at time of use.

Scroll to Top

 


Website Design & SEO by Rand Internet Marketing