All prices are "Cash & Carry" = Payment with Order, prior to shipment, by Currency, Company Check, Visa, MasterCard, Discover, American
Express; Pick-up or F.O.B. the SOMAY PAINT FACTORY in Miami, Florida U.S.A. All other sales are at higher prices than shown in these tables. All prices as of March 31, 2008, subject to change without notice.
Prices in effect on date of shipment will always apply. * Special Orders requiring special shipments from the factory may result in additional freight charges, especially for small quantities.NOTE:
All pot life/cure times are based on a temperature of 75° F. (24° C.) and relative humidity of 50%. Pot life and cure times will be shorter at higher temperatures and/or lower humidity; and longer at lower
temperatures and/or higher humidity. NOTE: It is essential that the applicator read and carefully observe all safety, surface preparation, product mixing, induction time, pot life, and temperature and humidity
parameters, as well as all application instructions on the Product Data Sheet and Material Safety Data Sheets when using these products. SOMAY offers detailed surface preparation instructions on request. NOTE: All coverage rates and film thickness numbers are theoretical (i.e. based on application to smooth, non-porous surfaces like plate glass), and do NOT allow for rough or porous surfaces, or for
less than 100% transfer efficiency, which MUST be considered when calculating the appropriate quantity of material to order. Most professional, experienced applicators of high performance coatings assume a minimum
10% loss factor under the most ideal conditions, and sometimes as high as 20% depending on the situation. March 31, 2008 |
