842-00 - SOMAY "ROOF MASTIC"® , Sealer and Protector - "CRYSTAL CLEAR" - "The New Roof in a Can"® - "Hurricane Proof Your Roof"® - "Shed's Water Like a Duck's Back"® - A Premium Quality, 100% Acrylic Resin-Based,
Waterborne Coating for use on sloped/inclined surfaces to help Seal, Waterproof, Windproof, Protect & Preserve your roof. "ROOF MASTIC"
is a waterborne, heavy-duty, exceptionally durable, clear, non-yellowing coating that will seal, waterproof, protect and preserve roof surfaces, including asphalt/fiberglass roof shingles, curved Spanish clay barrel tiles, flat concrete tiles, etc. Also available in "Energy Star"® White and 5 stock colors. Use SOMAY Product No. 777, Premium "PST" (below) as Primer under Product No. 842-00,
"ROOF MASTIC"
"CLEAR". Product No. 842-00 has all of the features and benefits of SOMAY Product No. 777. However, instead of being a thin viscosity like water to be able to penetrate into the open pores, cracks and crevices of surfaces, Product 842-00 has a thick viscosity like paste, so the applicator can build the desired 20 mils DFT per coat or the 40 mils DFT for two coats necessary to achieve waterproofing, windproofing and hurricane proofing benefits. Dries "Crystal Clear". See "Waterproofing Coatings" for more information. At 48% Vol. Solids = 750 sq.ft./gal./mil DFT = 3’/sq.ft./mil DFT.
Application Tips.
777 SOMAY "PREMIUM" "PST" PRIMER/SEALER/TOPCOAT A Premium
Quality, 100% poly-acrylic, waterborne, universal, all-purpose, exterior and interior, clear, non-yellowing coating that can be used as a Primer, a Sealer and a Topcoat or Finish Coating. It has
excellent resistance to ultraviolet (sun) light degradation, excellent adhesion to practically every properly cleaned and prepared surface, and dries to a hard finish that has excellent resistance to wear
due to normal pedestrian traffic. No solvents, no fumes
exceptionally user and environmentally friendly. "PST" will NOT "blush" or turn "white" if moisture develops under the coating, but will
remain clear. Because SOMAY "PST" will always "breathe", it allows moisture vapor to escape through the cured coating film. "PST" can be applied to concrete, stucco, masonry, non-glazed porous
brick, stone, concrete blocks, coral rocks and other porous decorative faηade materials, wood shingles, wood siding, wood decks, docks or porch floor surfaces, wood paneling (interior and exterior), metal
including aluminum, copper, brass, zinc, galvanized steel or primed tin or ferrous metal. "PST" can be used on practically any well-drained roof surface, including wood shingles, split cedar shakes,
asphalt shingles, fiberglass shingles, concrete tiles, clay tiles, barrel tiles, 90-lb. slate, roll roofing, etc. Over 20% Vol. Solids = 200 sq.ft./gal./mil DFT = only 7’/sq.ft/mil DFT. [MSDS] 787 "PREMIUM" ACRYLIC LATEX HIGH GLOSS VARNISH
A Premium quality, 100% acrylic, waterborne, heavy-duty, industrial strength, exceptionally durable, clear, non-yellowing,
exterior/interior varnish that will protect, preserve and help retain the natural color and beauty of wood and other substrates. No. 787 is resistant to fresh water, salt water, boiling water, mild
alkali, mild acids, alcohol, detergents and severe weather, including ultraviolet rays from the sun. User and environmentally friendly. It has no solvent vapors or odor, so it is safer to use,
especially in enclosed areas. Over 43% Vol. Solids = 692 sq.ft./gal./mil DFT = only 3’/sq.ft/mil DFT. [MSDS]
770-756 SOMAY HEAVY DUTY POLYURETHANE MARINE VARNISH Premium quality, heavy duty, industrial grade, single component, solvent borne (mineral spirits),
polyurethane-based marine varnishes especially formulated to give an exceptionally hard finish that helps to protect, preserve and retain the natural beauty and color of wood. Resistant to severe
weather, fresh and salt water, boiling water, dilute acids, alcohol and normal marring or scuffing. Available in 3 distinct formulations:
No. 770 Exterior High Gloss with Ultraviolet Light Absorber - Over 41% Vol. Solids = 671 sq.ft./gal./mil DFT = only 5’/sq.ft/mil DFT. [MSDS]
No. 756 Interior High Gloss - Over 41% Vol. Solids = 661 sq.ft./gal./mil DFT = only 4’/sq.ft/mil DFT. [MSDS]
572 SOMAY WATER REPELLENT/WOOD SEALER/COATING
Premium quality, alkyd (oil) based, solvent borne (mineral spirits) water-repellent/wood sealer/coating for exterior/interior use on unpainted porous wood surfaces when a water-repellent coating is desired. It provides a clear, protective moisture barrier to resist water penetration into the pores of the wood. Far superior to nationally advertised competitive water-repellent products. Over 22 % Vol. Solids = 361 sq.ft./gal./mil DFT = only 4’/sq.ft/mil DFT. [MSDS] 775-00 - SOMAY CHATTAHOOCHEE/CONCRETE SEALER - An Acrylic/Silicone
resin-based "Clear" Sealer, solvent-borne (Xylene), high gloss finish. Apply at the rate of 380 sq.ft./gal./mil DFT. [MSDS] February 4, 2008 |
