816 SWIMMING POOL COATING A Premium Quality pool coating, manufactured with Premium Quality "Pliolite"
rubber resin. This exceptionally tough, durable and long wearing coating is resistant to all normally used pool chemicals, and when applied according to directions on properly prepared pool surfaces,
should yield several seasons of protections. Use on unpainted or previously painted surfaces such as concrete, steel, aluminum and fiberglass. Made in white, which appears blue under water, and
in Jewel Blue. Can be tinted pastel colors if desired. Also available in black for swimming lane marking purposes. Surface preparation and application instructions must be followed
conscientiously. Over 44% Vol. solids = 670 sq.ft./gal./mil DFT = only 4’/sq.ft./mil DFT. [MSDS] Case History & Picture 942 SPORTS COURT NON-SKID COATING This premium quality, 100% acrylic latex
Sports Court Coating has been formulated to help create a skid-resistant surface on tennis, paddle, hand ball, basketball and volleyball courts. Contains a coarse texture additive to give a
skid-resistant surface also on walkways, steps, porches, breezeways, patios and around swimming pools. It dries quickly, providing a tough, durable, attractive finish. Available in White (for
lines) and traditional Tennis Court Red and Green. Over 50% Vol. Solids = 804 sq.ft./gal./mil DFT = only 3’/sq.ft/mil DFT. [MSDS] 171 "FIELD LINE MAKER"
An acrylic latex resin concentrate for marking athletic playing fields, such as football, soccer, baseball, lawn or clay tennis courts, track and field, etc. Dries in about 30 minutes, after which the lines are resistant to mild weather conditions. Much safer for players than old-fashioned powder, which will blow away with the wind or wash away with light rains. 29% Volume Solids = 458 sq.ft./gal.mil DFT = 2’/sq.ft./mil DFT. Normally diluted 3:1 with water = $0.004/sq.ft./mil DFT. [MSDS] 777 SOMAY "PREMIUM" "PST"
PRIMER/SEALER/TOPCOAT A Premium Quality, 100% poly-acrylic, waterborne, universal, all-purpose, exterior and interior, clear, non-yellowing coating that can be
used as a Primer, a Sealer, a Waterproofing Coating and a Topcoat or Finish Coating. It has excellent resistance to ultraviolet (sun) light degradation, excellent adhesion to practically every properly
cleaned and prepared surface, and dries to a hard finish that has excellent resistance to wear due to normal pedestrian traffic. No solvents, no fumes
exceptionally user and environmentally
friendly. "PST" will NOT "blush" or turn "white" if moisture develops under the coating, but will remain clear. Because SOMAY "PST" will always "breathe", it allows moisture vapor to escape
through the cured coating film. "PST" can be applied to concrete, stucco, masonry, non-glazed porous brick, stone, concrete blocks, coral rocks and other porous decorative faηade
materials, wood shingles, wood siding, wood decks, docks or porch floor surfaces, wood paneling (interior and exterior), metal including aluminum, copper, brass, zinc, galvanized steel or primed tin or
ferrous metal. "PST" can be used on practically any well-drained roof surface, including wood shingles, split cedar shakes, asphalt shingles, fiberglass shingles, concrete tiles, clay tiles, barrel
tiles, 90-lb. slate, roll roofing, etc. Over 20% Vol. Solids = 200 sq.ft./gal./mil DFT = only 7’/sq.ft/mil DFT. [MSDS]787 "PREMIUM" ACRYLIC LATEX HIGH GLOSS VARNISH A Premium quality, 100% acrylic, waterborne, heavy-duty, industrial strength, exceptionally durable, clear, non-yellowing, exterior/interior varnish that will protect, preserve and help retain the natural color and beauty of wood and other substrates. No. 787 is resistant to fresh water, salt water, boiling water, mild alkali, mild acids, alcohol, detergents and severe weather, including ultraviolet rays from the sun. User and environmentally friendly. It has no solvent vapors or odor, so it is safer to use, especially in enclosed areas. Over 43% Vol. Solids = 692 sq.ft./gal./mil DFT = only 3’/sq.ft/mil DFT. [MSDS]
770-756 SOMAY HEAVY DUTY POLYURETHANE MARINE VARNISH Premium quality, heavy duty, industrial grade, single component, solvent borne (mineral spirits),
polyurethane-based marine varnishes especially formulated to give an exceptionally hard finish that helps to protect, preserve and retain the natural beauty and color of wood. Resistant to severe
weather, fresh and salt water, boiling water, dilute acids, alcohol and normal marring or scuffing. Available in 2 distinct formulations:
No. 770 Exterior High Gloss with Ultraviolet Light Absorber - Over 41% Vol. Solids = 671 sq.ft./gal./mil DFT = only 5’/sq.ft/mil DFT. [MSDS]
No. 756 Interior High Gloss - Over 41% Vol. Solids = 661 sq.ft./gal./mil DFT = only 4’/sq.ft/mil DFT. [MSDS]
572 SOMAY WATER REPELLENT/WOOD SEALER/COATING
Premium quality, alkyd (oil) based, solvent borne (mineral spirits) water-repellent/wood sealer/coating for exterior/interior use on unpainted porous wood surfaces when a water-repellent coating is desired. It provides a clear, protective moisture barrier to resist water penetration into the pores of the wood. Far superior to nationally advertised competitive water-repellent products. Over 22% Vol. Solids = 361 sq.ft./gal./mil DFT = only 4’/sq.ft/mil DFT.
[MSDS] 472 CUSTOM COLOR WOOD STAIN a
solvent-thinned, oil based, exterior/interior, clear stain base from which hundreds of Custom Colors can be made. This stain will enhance the appearance of the natural grain and texture of wood.
Should be sealed with a finish coat such as our polyurethane marine varnish. [MSDS] February 4, 2008 |
